Application
-
Detection of Multiple Ions in Circuit Board
The density of the electrical components on the PCB circuit board is high, and the residual separation on the surface will cause the possibility of separation migration, resulting in open circuit, short circuit and other phenomena. If there is acid residue on the surface...Read more -
Determination of Anion in Seawater
In recent years, with the importance of ocean development and application, great progress has been made in the exploitation of ocean water and ocean energy. However, there are still difficulties and unknown areas in the study of ocean water. The composition of seawater i...Read more -
Determination of Fluoride and Chloride in Alumina
Alumina has many good properties, and its applications are extremely wide, such as biomedical engineering materials, fine ceramics, alumina fiber high-strength and heat-resistant products, special refractory materials, catalysts and carriers, transparent alumina ceramics...Read more -
Chromium (VI) in toys
Chromium is a metal with many valence states, the most common of which are Cr (III) and Cr (VI). Among them, the toxicity of Cr (VI) is more than 100 times higher than that of Cr (III). It is very toxic to humans, animals and aquatic organisms. It is listed as a primary ...Read more -
Explosive analysis
In order to detect chlorate in ammonium nitrate explosive, the soil sample after explosion was extracted by water oscillation,then taking supernatant after centrifugation, filtered by IC-RP column and 0.22 um microporous filtration membrane.Using CIC-D120 ion chromatogra...Read more -
Printed circuit board
Using oxygen bomb combustion method to detect the halogen content in printed circuit boards. In the airtight oxygen bomb combustion chamber, the samples to be measured were fully burned and absorbed by the absorbed liquid. Using CIC-D120 ion chromatograph, SH-AC-9 anio...Read more -
Concrete admixtures
Chloride ion is a harmful component in cement and cement raw materials. It has a direct impact on preheater and kiln calcination in new dry process cement production, resulting in accidents such as ring formation and plugging, affecting equipment operation rate and ceme...Read more -
Detection of Cr(VI) in toys by IC-ICPMS
Latent crisis in toys Chromium is a multivalent metal, the most common of which are Cr (III) and Cr (VI). Among them, the toxicity of Cr (VI) is more than 100 times of that of Cr (III), which has a very large toxic effect on human beings, animals and aquatic organisms. ...Read more -
Glyphosate
It is understood that the low-end glyphosate salt in the market is usually posed as the high-end glyphosate salt, which people can make huge profits from it and disturbs the market environment of glyphosate preparations.Taking 30%glyphosate solution as an example, 33% gl...Read more -
Application of Ion Chromatography in Pesticide Industry
Surface water is generally relatively clean. After 30 minutes of natural precipitation, taking the non precipitation part of the upper layer for analysis. If there are many suspended substances in the water sample or the color is darker, pretreat it by centrifugation, fi...Read more -
Determination of Anions in 96% Sodium Chloride
Through this article, we want to show how to determine other ions in high concentration salt samples. Instruments and equipment CIC-D160 Ion chromatograph and IonPac AS11HC Column（with IonPac AG11HC Guard co...Read more -
Synthetic polymer materials
Using oxygen bomb combustion method to realize the quantitative analysis and detection of halogen in color masterbatch. In the airtight oxygen bomb combustion chamber, the sample to be measured was fully burned and absorbed by the absorbed liquid. Using CIC-D120 ion chro...Read more
